COMBINED CUTTING LINE

COMBINED LINE – CROSS – CUTTING

The combined line for cross-cutting is intended for cross-shearing of coiled rolled sheets into panels.

Technical parameters of the line

Input

sheet thickness 0,5 – 3 mm
coil width 500 – 1500 mm
coil – inside diameter 500 / 600 mm
coil – outside diameter max. 1610 mm
coil – weight max 15t

Output

sheet width 500 – 1500 mm
sheet length 1000 -4000 mm
Weight of sheet bundle max. 4t
maximum bundle height 240 mm
side trimming  is not

COMBINED LINE – LONGITUDINAL CUTTING

The longitudinal cutting line is intended for longitudinal shearing of coiled rolled sheet into rolls.

Technical parameters of the line

Input

shit thickness 0,5 – 3 mm
coil width 300 – 1500 mm
coil – inside diameter 508 / 610 mm
coil – outside diameter max. 1610 mm
coil – weight max 15 t

Output: minimum band width - according to the thickness

band width 30 – 1500 mm
band – inside diameter 508 mm
band – outside diameter max. 1610 mm
weight max . 8 t
weight of band rolls 2,8 – 9,8 kg/mm width

THIN CUTTING LINE – CROSS

The thin cross-cutting line is intended for cross-shearing of cold-rolled coiled sheet into panels.

Technical parameters of the line

Input

sheet thickness 0,5 – 2 mm
sheet width 450 – 1500 mm
coil – inside diameter 500 / 600 mm
coil – outside diameter max. 1700 mm
coil – weight max 15t

Output

sheet width 450 – 1500 mm
sheet length 450 – 3000 mm
Weight of sheet bundle max. 4 t
maximum bundle height 240 mm
side trimming is not

THIN CUTTING LINE – LONGITUDINAL

The thin longitudinal cutting line is intended for longitudinal shearing of cold-rolled coiled sheet into bands.

Technical parameters of the line

Input

sheet thickness 0,4 – 2 mm
sheet width 300 – 1540 mm
coil – inside diameter 500 / 600 mm
coil – outside diameter max. 1170 mm
coil– weight max 15 t

Output: minimum band width - according to the thickness

band width 30 – 1500 mm
band –  inside diameter 500 / 600 mm
band –  outside diameter max. 1700 mm
weight max . 15 t
weight of band rolls 2,8 – 9,8 kg/mm width

THICK CUTTING LINE – CROSS

The thick cross-cutting line is intended for cross-shearing of hot-rolled coiled sheet into panels.

Technical parameters of the line

Input

sheet thickness 1,5 – 8 mm
grade 11523 to 6 mm
patterned sheet to 6 mm
coil width 800 – 2000 mm
coil –  inside diameter 600 / 700 / 850 mm
coil –  ouside diameter max. 1850 mm
coil – weight max. 22,5 t

Output

sheet width 8000 – 2000 mm
sheet length 850 – 9000 mm
the agreement more
weight of sheet bundle max. 5 t
side trimming 15 – 40 mm but without trim

THICK CUTTING LINE – LONGITUDINAL

The thick longitudinal cutting line is intended for longitudinal shearing of hot-rolled coiled sheet into bands.

Technical parameters of the line

Input

sheet thickness 1,5 – 4 mm
grade from 11 375 to 5 mm
coil width 650 – 1500 mm
coil – inside diameter 500 / 600 / 700 / 850 mm
coil – outside diameter max. 1850 mm
coil – weight max. 20 t
maximum strength 500 MPa
maximum stretch 400 MPa

Output

band width 60 – 1500 mm
band – inside diameter 500 / 600 mm
band – outside diameter max. 1850 mm
weight of band max. 20 t
weight in millimeters 5,0 – 12,0 kg/mm width